top of page
A403 WP304H, A403 WP317L, A403 WP321H, A403 WP347H, A403 WP410S, A403 WP904L

Available in material grades:

(S)A106 / API 5L Grade B, Grade C
(S)A333 Grade 6, Grade 3
(S)API 5L Grade B, X42, X52, X60, X65, X70 PSL 1
and PSL 2
(S)A335 P1, P11, P22, P5, P9, P91
(S)A312 TP 304L, 304H, 310, 310H, 310S, 316L, 316H, 317L, 321H, 347H, 904L
UNS S31803
254 SMO / UNS S31254, UNS S32750, UNS S32760
 
Alloy C276 / UNS N10276
Alloy 400 / UNS N04400 
Alloy 600 / UNS N06600, Alloy 601 / UNS N06601,
Alloy 625 / UNS N06625, 
Alloy 800 / UNS N08800, Alloy 800H / UNS N08810,
Alloy 800HT / UNS N08811
Alloy 825 / UNS N08825

WELDED
PIPES

Available in material grades:

(S)A387 Grade 11, 22, 5, 9, 91
(S)A312 / (S)A358 TP 304L, 304H, 310, 310H, 310S, 316L, 316H, 317L, 321H, 347H, 904L
UNS S31803
254 SMO / UNS S31254, UNS S32750, UNS S32760

Alloy C276 / UNS N10276
Alloy 400 / UNS N04400 
Alloy 600 / UNS N06600, Alloy 601 / UNS N06601,
Alloy 625 / UNS N06625, 
Alloy 800 / UNS N08800, Alloy 800H / UNS N08810,
Alloy 800HT / UNS N08811
Alloy 825 / UNS N08825

A182 F5, A182 F9, A182 F11, A182 F22,  A182 F91
Maron Steel Supllies also have the ability to supply finned and studded pipes.

WE SPECIALIZE IN

SHORT DELIVERY TIMES!

A182 F304H,  A182 F316H, A182 F317L, A182 F321H, A182 F347H, A182 F410S, A182 F904L

FINNED
PIPES

Welded Finned Tubes in Type L, KL, LL, G Embedded, Extruded
 
Finned Tubes are helically wound and continuously welded to the tube by high frequency electric resistance welding of solid or serrated steel fins. This produces a homogeneous, clean and continuous fin-to-tube bond with no additional weld material, for a very efficient heat flow and resistance to corrosion.
This manufacturing process is carried out under strict standards. We also supply finned tubes with intermediate plain portions where required.
 
The use of high-frequency current results in extremely localized heating of the tube surface and the edge of the fin. This skin effect produces higher weld speeds, hence post-weld heat treatment is not considered necessary because of the superficial nature of the changes in the microstructure.

STUDDED
PIPES

The steel studs are automatically resistance-welded to the pipe, producing high quality forge welds. Automatic studding machines are capable of handling pipe diameters from 60mm o/d to 219mm o/d and standard stud diameter of 12.7mm.
 
The welding process enables the combination of any grades for studs and pipes: carbon, alloy, stainless steel and high nickel alloys. Alloy steel pipes are stress-relieved after studding, according to the relevant specifications for the class and grade of steel used.

A387 GRADE 5, A387 GRADE 9, A387 GRADE 11, A387 GRADE 22, A387 GRADE 91
bottom of page